Frustrated by an annoying tE error code popping up on your Samsung oven display? You’re not alone. This common issue is caused by an inaccurate temperature reading, which can stem from problems with the sensor, wires, or control board. Learning to properly diagnose the root cause is key to getting your oven back in working order. This guide will walk you through some simple troubleshooting steps to identify where things have gone wrong and how to make the needed repairs.
tE Error Code Meaning
The tE error code indicates an issue with your Samsung oven’s temperature sensor. This sensor monitors the internal oven temperature and sends data back to the control board. When the control board receives inaccurate temperature data, it will turn on the tE error code to alert you to the problem.
Common causes for tE oven errors
There are a few common issues that can cause the tE error code to appear:
| Cause | Explanation |
| 1. Faulty or damaged temperature sensor | The oven temperature sensor may be defective or damaged, preventing it from accurately reading the oven’s internal temperature. |
| 2. Broken sensor wiring connections | Faulty wiring connections can prevent temperature data from properly reaching the control board. |
| 3. Defective oven thermostat | For dual oven models, a broken thermostat that regulates temperature could trigger the error code. |
| 4. Failed oven control board | In some cases, the oven control board itself may have failed, leading to the tE error code. |
Control board’s response to inaccurate temperature data
When the oven control board receives abnormal temperature data from the sensor, it will attempt to correct the issue. If the inaccurate readings continue, the control board initiates the tE error code to alert you that professional service is required. This preventative measure stops the oven from overheating and causing additional issues.
Troubleshooting
If you see the tE error code on your Samsung oven, there are a few troubleshooting steps you can take to resolve the issue. Let’s walk through how to diagnose and fix the problem.
Temperature sensor testing
The oven temperature sensor is one of the most likely causes of the tE error. Here’s how to test it:
- Turning off the oven power supply – Locate the circuit breaker or fuse that controls your oven and switch it off before testing. Safety first!
- Accessing the sensor wiring and connections – Remove the oven’s rear panel to expose the sensor wiring. Consult your oven’s service manual if needed.
- Detaching the sensor wiring from the main control board – Gently detach the sensor wire harness from the oven’s main control board.
- Checking the sensor resistance with a multimeter – Use a multimeter to check the sensor’s electrical resistance. Refer to your oven’s specifications for the correct oven temperature sensor resistance range.
- Inspecting the temperature sensor and wiring for damage – Check for any visible damage to the sensor probe or wiring that could cause faulty readings.
Did you know? A damaged oven temperature sensor is the most common cause of tE error codes.
Checking oven thermostats
For dual oven models, you’ll also want to check the thermostat:
- Using a multimeter to check thermostat units for continuity – No continuity means the thermostat is broken and needs replacement.
- Inspecting thermostat wiring for damage and proper connection – Faulty thermostat wiring can also lead to tE error codes.
Inspecting electrical connections
Lastly, inspect all electrical connections:
- Examining sensor wiring connections on the main control board – Reseat any loose wire connections.
- Looking for signs of damaged or faulty wiring – Replace any deteriorated wiring.
Replacing the Oven Control Board
If troubleshooting steps don’t resolve the tE error code, you may need to replace the oven control board.
When to replace the control board
Consider replacing the oven’s control board if:
- The oven temperature sensor tests normal, but the tE error persists
- You find obvious damage to the control board
- Troubleshooting points to a failed control board
Replacing the board may be required even after checking other components.
Consulting the oven’s service manual for proper board replacement
- Locate the service manual for your Samsung oven model
- Follow the step-by-step instructions for removing and replacing the control board
- Take pictures before disconnecting any wiring to make reassembly easier
Locating the correct replacement part using the model number
- The oven model number is printed on a label inside the oven door jamb
- Search online using the model number to find the right replacement control board
Did you know? Using the exact replacement part for your oven model is crucial for proper functionality.
Verifying Repair Success
After replacing the oven control board or other components, verify that the repair was successful.
1. Reconnecting the oven power and verifying proper heating
- Restore power to the oven at the circuit breaker or fuse panel
- Set the oven to bake at 350°F to check that it heats up appropriately
- Confirm the oven reaches the set temperature
2. Running the oven through several cycles to ensure no tE code reappears
- Try baking, broiling, and self-clean cycles
- Allow the oven to fully complete each cycle with no new error codes
- Repeat cycles as needed to confirm the error code is resolved
3. Reinstalling the oven back panel after testing
- Once the operation is restored, reinstall any panels that were removed
- Return the oven to its original assembled condition
- Run one more test cycle to validate proper functionality
Did the tE code come back? If so, further troubleshooting or repair may be needed.
Preventing Future tE Error Codes
After fixing the tE error code, take these steps to help prevent it from coming back:
1. Maintaining oven cleanliness to prevent debris buildup on the temperature sensor
- Always wipe up spills promptly after cooking
- Use mild cleaners and avoid harsh chemicals on the sensor
- Gently clean around the sensor opening without damaging it
2. Handling oven parts gently during cleaning and replacement
- Take care not to bend or damage the temperature sensor probe
- Avoid tugging or stressing the sensor wiring connections
- Handle control boards with care when removing or replacing
3. Operating the oven within its maximum heat rating
- Don’t use the self-cleaning mode excessively
- Avoid prolonged broiling at extremely high temperatures
- Use appropriate cookware that won’t drastically increase oven temperature
Following the manufacturer’s maintenance recommendations can also help prevent future tE error codes.
Conclusion
We’ve covered a lot of ground on resolving Samsung oven tE error codes. Let’s recap the key points:
- The tE error indicates an issue with the oven temperature sensor.
- Common causes include a faulty sensor, wiring problems, defective thermostat, or failed control board.
- Troubleshooting involves testing the sensor, inspecting connections, and replacing the control board if needed.
With methodical testing and replacement of damaged parts, tE errors can be repaired by handy homeowners. Arm yourself with the right information and take precautions. Most tE error causes are straightforward to fix.