Refrigerator Defrost Cycle: Signs of Malfunction and Solutions

Learn to fix refrigerator defrost cycle malfunctions, identify signs of failure, and perform preventive maintenance effectively.

By
Kris Escueta

Have you ever wondered why frost tends to build up inside your freezer? Or how your refrigerator prevent this frost from piling up out of control? The answer lies in a crucial cycle known as defrosting. Every refrigerator relies on an automatic process called the defrost cycle to clear away excess frost. However, this system can malfunction at times, leading to problems like ice buildup or warm spots in the fridge. Understanding this cycle and its potential issues is key to keeping your appliance running smoothly.

What is a Defrost Cycle?

A defrost cycle is an important part of how your refrigerator works. Have you ever noticed ice building up inside the freezer? Or maybe your fridge seems warmer than it should be. This happens because of something called frost.

What is frost?

Frost is tiny ice crystals that form when moist air touches cold surfaces inside the fridge and freezer. Just like when we breathe out in cold weather, the water vapor in the air freezes into frost. Over time, more and more frost builds up on the evaporator coils in the back of the fridge and freezer.

Why does frost cause problems?

After a while, too much frost acts like insulation. It prevents cold air from circulating and keeps your food from staying cool. The freezer might even start to warm up! Do you wonder how your refrigerator prevents all that frost from piling up? That’s where the defrost cycle comes in.

What is a defrost cycle?

A defrost cycle is a process that clears away the frost buildup using a nifty little heater. Here’s how it works:

PartDescription
Evaporator coilsCoils behind the fridge and freezer that get very cold to keep food chilled. Frost forms on these over time.
Defrost heaterA small electric heating element that is part of the refrigerator system.
Defrost cycleOn a regular schedule, the refrigerator automatically turns the cooling system off and the defrost heater on. This melts the frost into water.
Defrost drainThe drain carries the melted frost water out of the refrigerator compartment so it doesn’t refreeze.

Types of Defrost Cycles

Modern refrigerators use different methods for their defrost cycles. Let’s break down the two main types:

Cycle Defrost

Many older refrigerators use a system called cycle defrost. Here’s how it works:

PhaseDescription
Cooling CycleThe refrigerator runs as normal, with the cooling system on to keep foods cold.
Defrost StartAfter a set number of hours, the defrost cycle begins automatically.
Heater OnThe cooling system turns off, and the small defrost heater turns on.
Melting FrostThe heater warms the evaporator coils just enough to melt the frost into water.
Drain RemovedWhen defrosting is done, the water drains out of the refrigerator compartment.
Cooling ResumesWith the frost gone, the cooling system restarts to keep things cold again.

Does this cyclical approach make sense? It provides frequent but short defrost periods to stay on top of small amounts of frost buildup.

Adaptive Defrost

Newer refrigerators use a more advanced defrost system called adaptive defrost. How is it different?

FeatureCycle DefrostAdaptive Defrost
ControlMechanical timerMicroprocessor
Defrost ScheduleRegular time intervalsOnly when needed
Energy UseUses more energyUses less energy
TemperatureMore fluctuationsLess fluctuations

Unlike cycle defrost, adaptive defrost continuously monitors frost levels and only initiates a defrost cycle when truly necessary. This saves energy but keeps temperatures steadier in the fridge and freezer.

Signs of a Malfunctioning Defrost Cycle

Has your fridge seemed off lately? Knowing the signs can help spot problems with the important defrost cycle.

Frost Buildup

Seeing more frost than usual inside your freezer is never a good thing. Too much frost means the defrost heater isn’t doing its job to clear it away. You may notice:

  • White or clear ice coating the evaporator coils and walls
  • Frost visible on freezer shelves that won’t wipe away
  • Items frozen together from excess ice

Warm Refrigerator Compartment

Since the defrost cycle clears frost from both the freezer and refrigerator sides, issues on one affect the other. If the freezer is cold but the fridge side seems warmer, there’s likely a defrost problem.

Water Leaks

Normally the defrost drain tube safely carries away melted frost water. But puddles or wet spots around your fridge could mean a clogged or frozen drain tube. The water has nowhere to go then.

Common Causes of Defrost Cycle Malfunctions

Ever wonder why your fridge’s defrost system might stop working properly? There are a few main reasons why issues could arise.

Defective Defrost Heater

The tiny electric heating element plays a big role in melting frost. But like any appliance part, it can fail over time. Without the heater turning on, frost sticks around permanently.

Faulty Defrost Timer

This controls the automatic switching between cooling and refrigerator defrost cycles. If the timer wears out or breaks, it can’t properly run the defrost when needed.

Malfunctioning Defrost Thermostat

A thermostat by the coils senses frost levels. But if the thermostat stops working, it won’t send signals for the heater to turn on at the right times. Frost builds up faster then.

It’s important to understand these common causes so problems can get fixed before lasting damage occurs. For example, a broken timer means the system never defrosts at all until it’s replaced. And a busted thermostat allows excess frost 24/7 until repaired.

Troubleshooting and Solutions

If your fridge’s defrost cycle seems off, there are proactive steps to diagnose and fix the root cause:

Check the Defrost Heater

  • Unplug the fridge and access the heater behind the freezer wall
  • Use a multimeter set to ohms (Ω) to test continuity
  • Check for a 10-150Ω reading; higher means a broken circuit
  • Replace heater if faulty to melt frost as needed

Inspect the Defrost Timer

  • Locate the timer inside the fridge compartment
  • Manually advance timer dial to simulate a defrost cycle
  • Listen for click sound; replace if there is no movement or sounds

Test the Defrost Thermostat

  • The thermostat attaches to the evaporator coils
  • Multimeter in ohms checks for closed circuit reading
  • Replace thermostat if stuck open and can’t sense frost

Taking the time to systematically troubleshoot key components can help identify and resolve refrigerator defrost problems. Replacing worn parts restores the critical cycle and prevents future fridge issues and food waste.

Preventive Maintenance Tips

Taking a few minutes each month to inspect your refrigerator can help it last for years. Simple checks and cleans keep things running smoothly:

Regular Cleaning

  • Wipe down fridge shelves and drawers weekly with a damp cloth
  • Check monthly behind the fridge for dust on coils and vents
  • Vacuum coils or rinse with water anytime you see dirt buildup

This prevents excess frost that the refrigerator defrost cycle must clear away.

Clear the Defrost Drain

  • Look under the fridge for a drain tube opening
  • Shine a light inside and clean with compressed air or bend a wire hanger to remove gunk
  • A clogged drain causes water leaks and freezing issues!

Proper Food Storage

  • Don’t overload shelves, which blocks airflow
  • Allow space between items for cool air to circulate
  • Try not to open doors more than needed to keep cool air in

With some preventive love, your fridge stays at peak performance. Small efforts mean your kitchen friend lasts for many years to come!

Also Read How to replace a GE freezer defrost heater WR51X10131

Conclusion

We’ve covered a lot about refrigerator defrost cycles – from what causes frost to the different types of cycles, potential issues, troubleshooting steps, and preventive care. Do you feel more informed about how your fridge works behind the scenes now?

To summarize the key things we discussed:

  • Frost naturally forms from moisture in the air inside refrigerators.
  • The refrigerator defrost cycle uses a heating element to automatically melt built-up frost periodically.
  • There are two common cycle types – regular intervals or “as needed” adaptively.
  • Issues cause excess frost, water leaks, or warm temperatures in spots.
  • Common problems relate to the heater, timer, or thermostat components.
  • Checking, cleaning, and preventive maintenance extend appliance life.

By understanding your fridge’s defrost system, you now know what signs show it needs attention before bigger problems arise. Taking small steps each month means it’ll keep working great over the long run, too.