Range hood fan humming away while smoke and steam just hang over your cooktop? A hood that runs but moves no air is not doing its job, and the cause is usually a clogged filter or a blockage in the venting, both of which you can clear yourself.
Here is why a range hood loses airflow and how to restore it.
This article will teach you:
- What kills range hood airflow
- Why the filter matters most
- How to check the duct and damper
- When the fan motor has failed
Why the Range Hood Won’t Move Air
A hood pulls air through a filter and pushes it out a duct or through a recirculating filter. When airflow drops, the usual causes are:
- A grease-clogged filter, the most common cause by far.
- A blocked or disconnected duct running to the outside.
- A stuck exterior damper that will not open to let air out.
- A saturated charcoal filter on recirculating models.
What You’ll Need
- Degreaser and hot water
- A replacement charcoal filter, if applicable
- Your owner’s manual
How to Fix a Range Hood With No Airflow
Start with the filter.
- Clean the grease filter. Remove the metal mesh filter and soak it in hot water with degreaser to clear trapped grease.
- Check the duct. Confirm the duct is connected and not crushed or clogged with lint and grease.
- Inspect the damper. Find the exterior vent flap and make sure it opens freely when the fan runs.
- Replace the charcoal filter. On recirculating hoods, swap a saturated charcoal filter that no longer passes air.
Pro Tip: A greasy mesh filter is the top reason a range hood stops moving air. Washing it every few weeks keeps airflow strong and reduces the fire risk from grease buildup.
When to Look a Little Deeper
Because airflow depends on clean filters and a clear vent, it helps to maintain both, and reviewing how to replace carbon filters in a range hood keeps recirculating models working. If the fan is noisy or dead, see a range hood rattling or humming and a dead range hood.
When to Call a Pro
If the filter is clean, the duct is clear, and the damper opens but airflow is still weak, the fan motor or blower wheel may be failing. Ductwork inside walls or a motor swap can be a good time to bring in a pro.
Wrapping Up
Most range hood airflow problems are filter or duct related. Here’s the recap:
- Clean the greasy mesh filter.
- Confirm the duct is connected and clear.
- Check that the exterior damper opens.
- Replace a saturated charcoal filter.
Clean the filter and clear the vent, and airflow usually comes right back. You’ve got this.