Grinder suddenly rattling, grinding harshly, or louder than usual? A change in sound is worth checking, because it often means a stray object, a jam, or a part working loose.
Here is what makes a grinder loud and how to quiet it.
This article will teach you:
- Why the noise changes
- What to check first
- How to inspect the burrs
- When a part has failed
Why the Grinder Is Loud
- A stone or stem rattling in the burrs.
- A loose hopper or lid.
- Worn or chipped burrs.
- Grinding with no beans, burr on burr.
What You’ll Need
- A brush and vacuum
- Your owner’s manual
How to Fix a Loud Grinder
- Unplug it. Stop and unplug when the sound changes.
- Check for debris. Empty the hopper and look for stones or stems.
- Tighten parts. Seat the hopper and lid so nothing rattles.
- Inspect the burrs. Look for chips, and avoid running the grinder empty.
Pro Tip: A sudden harsh, rattling noise usually means a hard object like a small stone is in the burrs. Stop immediately and clear it, since grinding on a stone can chip the burrs.
When to Look a Little Deeper
Because noise ties to jams and wear, it helps to check those, and reviewing a stuck burr, an overheating grinder, or a stuck motor can reveal the cause.
When to Call a Pro
If the burrs and parts are clean and tight but the noise continues, a bearing or motor is wearing out. Replacement is usually the practical route.
Wrapping Up
A loud grinder usually has debris or a loose part. Here’s the recap:
- Unplug when the sound changes.
- Check for stones and stems.
- Seat the hopper and lid.
- Inspect the burrs for chips.
Clear debris first, and the grinder quiets down. You’ve got this.