A cracked Samsung refrigerator crisper cover frame can leave your fruit and vegetable drawers stuck or unsteady. Fortunately, this repair is simple and can be completed in under an hour with just a few tools.
What the Crisper Cover Frame Does
The crisper cover frame is the plastic assembly at the bottom front of the fresh food compartment. It supports the glass panel and also serves as the front cover for the crisper drawers.
When the frame cracks or breaks, the glass may loosen or detach, and the drawers may no longer open or close smoothly. Replacing it with the Samsung crisper cover frame (part # DA63-04281A) is a straightforward solution.
Tools and Parts You Will Need
Before you begin, gather the following:
- Phillips head screwdriver
- Large flat-blade screwdriver
- Small flat-blade screwdriver
- Replacement Samsung crisper cover frame (part # DA63-04281A)
Why You Should Replace the Frame
A damaged frame makes the refrigerator inconvenient to use and can put additional stress on the drawers and glass panel. Replacing it keeps the compartment stable and prevents further wear.
How to Replace a Samsung Refrigerator Crisper Cover Frame
Follow these steps to remove the old crisper cover frame, install the new one, and get your refrigerator drawers working properly again.
Remove the Crisper Drawers
- Open the refrigerator doors fully.
- Pull out both crisper drawers from the bottom compartment.
- Lift slightly as you pull to disengage the drawers from the glide rails.
- Set the drawers aside.
- Press down on the crisper cover to release the bottom support tab.
- Slide the crisper cover assembly forward and lift it out.
Detach the Old Cover Frame
- Place the crisper cover assembly on a flat surface.
- Remove the support bar by pressing the locking tabs on each side.
- Use a flat-blade screwdriver to carefully pry up the glass retainers from each corner.
- Support the glass while detaching the retainers.
- Lift the glass panel out from the front and set it aside.
- Flip the cover frame over.
- Remove the four Phillips screws and detach the reinforcement bar.
- Use a small flat-blade screwdriver to press the release tabs and remove the sliders from each side.
- Discard the old cover frame.
Install the New Cover Frame
- Insert the new sliders into the frame and press them in until they click.
- Attach the reinforcement bar underneath using the Phillips screws.
- Flip the frame over and install the glass panel into the front slots.
- Press the retainers firmly back into the corners.
- Snap the support bar back into place by aligning its tabs with the frame openings.
Reinstall the Crisper Assembly
- Slide the crisper cover frame assembly back onto the tracks inside the fridge.
- Press down slightly on the cover while pushing back to lock the bottom support tab.
- Replace both crisper drawers by inserting them back into their tracks and pushing them in fully.
Final Steps
- Check that the glass panel and support bar are secure.
- Make sure the drawers open and close smoothly.
- Close the refrigerator doors.
- Plug the refrigerator back in and power it up.
Maintenance Tips to Prevent Future Damage
After installing the new crisper cover frame, you can reduce wear and avoid another replacement by following these practices:
- Avoid overloading the crisper drawers with heavy produce
- Always lift the glass panel gently when cleaning
- Wipe down the frame regularly to remove spills before they harden
- Check for small cracks during routine cleaning so they do not spread
- Use both hands to pull drawers out instead of forcing them from one side
- Keep drawer rollers and tracks clean to prevent extra stress on the frame
What to Remember
A sturdy crisper cover frame makes a big difference in how smoothly your refrigerator works. Once you swap out the old frame for the new one, your drawers glide easily and the glass sits firmly in place again. Taking care of the replacement right away helps avoid bigger problems later and keeps your fridge running like it should. With the new frame in place and a few simple habits to protect it, you can count on your crisper drawers staying reliable for years.