Replacing the Broil Element in Your Frigidaire Electric Range

It’s frustrating when you’re about to cook a great meal and realize your broil element isn’t working. The good news? You can replace it yourself without much hassle. Whether you’re just starting out with repairs or have tackled a few before, this is a manageable fix that could save you the cost of a service call.

Signs the Broil Element Might Be Faulty

Before replacing anything, it helps to confirm the broil element is actually the issue. Here are a few things to watch for:

• The top of the oven doesn’t heat up when using the broil function
• Visible damage, such as blistering, cracks, or breaks in the element
• Uneven browning or cooking during broiling
• The broil setting produces no heat at all
• You hear electrical buzzing or popping sounds when broil is activated
• The element doesn’t glow red when in use
• The oven trips the breaker when broil is selected

When to Replace Instead of Repair

While some minor issues can be fixed, broil elements often need to be replaced outright. Here’s when it’s better to swap in a new one:

• The element is visibly broken or burned through
• Cleaning or tightening connections hasn’t fixed the issue
• Multiple attempts to restart the broil function have failed
• The element shows signs of corrosion
• Replacement parts are inexpensive and readily available
• You’ve already checked the control board and wiring with no issues found
• The oven is otherwise in good working order

What You’ll Need

• Phillips screwdriver
• Replacement broil element

Safety First

Working on appliances means taking a few precautions to stay safe. Here are some important steps to follow:

• Turn off the power: Unplug the oven or switch off the circuit breaker to avoid the risk of electric shock.
• Let it cool: If the oven was recently used, give it time to cool down completely before handling anything inside.
• Take your time: Rushing can lead to mistakes or injuries. Work carefully and at a steady pace.
• Use proper lighting: Good lighting helps you see clearly and reduces the chance of errors.
• Clear the area: Keep your workspace free of clutter, and keep pets and kids out of the way.
• Stay dry: Don’t touch any internal parts with wet hands. The work area should also be dry.
• Read the manual: Check if your oven’s manual includes specific guidance on part replacements.
• Handle parts gently: Avoid using force when removing or installing components.
• Wear gloves: Insulated gloves can protect your hands from sharp edges or debris.
• Be careful around wires: Avoid touching exposed wires. Use insulated tools if needed.
• Skip live voltage tests unless trained: Only use a multimeter on live wires if you’re familiar with how to do it safely.
• Use eye or dust protection if needed: If there’s debris or dust, safety glasses or a dust mask can help protect you.

How to Replace the Broil Element in a Frigidaire Electric Range

Follow these steps to remove the old broil element and install a new one.

1. Turn off the oven and disconnect it from the power source.
2. Open the door and remove the racks.
3. Remove the mounting screws holding the old element in place.
4. Slowly pull the old element forward, allowing the wires to come through the liner so that you can disconnect them while keeping them accessible.
5. Connect the wires to the new broil element and move it into position.
6. Reinstall the mounting screws.
7. Put the oven racks back in.
8. Restore power to the oven and test it in broil mode to confirm it’s working correctly.

Read More: How to replace the broil element in an electric Frigidaire range

Tips for a Smoother Repair

A little preparation can make the job quicker and less stressful. Keep these tips in mind:

• Take a photo of the current element setup before removing it
• Label any wires you disconnect to match them correctly later
• Keep screws in a small cup so they don’t get lost
• Double-check the part number to match your oven model
• Lay a towel or mat inside the oven to protect the interior during the swap
• Don’t overtighten screws when installing the new element
• Test the oven on broil once everything is reconnected and powered back on

Closing Thoughts

Replacing the broil element in your Frigidaire electric range isn’t nearly as complicated as it might seem at first. With a few basic tools, a bit of patience, and a little care, you’ll have your oven up and running again in no time. The best part? You’ll save money by doing it yourself and gain some serious DIY confidence along the way. Don’t let a faulty broil element stop you from cooking your favorite dishes.