How to Fix Samsung Electric Range Bake and Broil Function Issues

When the bake and broil functions on your Samsung electric range stop working, it can be frustrating, especially if you’re in the middle of preparing a meal. In this guide, we’ll cover some common issues that may be preventing your oven from heating properly and provide step-by-step instructions to help you diagnose and fix the problem, so you can get back to cooking.

Safety Precautions

Working on any appliance requires prioritizing safety. Here are essential safety tips to follow:

1. Power Off and Unplug: Always turn off and unplug the appliance or switch off the circuit breaker before starting any maintenance. This helps prevent any risk of electric shock.
2. Wear Insulated Gloves: Insulated gloves protect your hands from sharp parts, pinching hazards, and debris.
3. Avoid Rushing: Take your time and work carefully to prevent accidents or injuries.
4. Well-Lit Workspace: Ensure your workspace is well-lit so you can clearly see and access internal parts.
5. Clear the Area: Remove any clutter or obstacles from your workspace and keep children and pets away from the area.
6. Dry Hands and Workspace: Never work with wet hands or in a damp area. Make sure everything is dry to prevent electrical hazards.
7. Review the User Manual: Check for specific safety or installation instructions for your range or any replacement parts you may need.
8. Handle Parts Gently: Excessive force can damage your appliance and increase the risk of injury.
9. Use Safety Glasses: Wear eye protection when working with chemicals, dust, or large debris.
10. Allow Cooling Time: If the oven has been used recently, allow it sufficient time to cool down to avoid burns.
11. Document Connections: Take photos or make notes of wiring connections before disconnecting anything. This will help with reassembly.
12. Use Insulating Tools: When working with wires, avoid touching exposed parts directly. Use a non-conductive tool or insulating gloves.

Tools and Materials Needed

To troubleshoot the bake and broil functions on your Samsung electric range, gather these tools and materials:

• Phillips Head Screwdriver: For removing screws on the range.
• Multimeter: To test electrical continuity and diagnose any faulty components.

How to Troubleshoot a Samsung Range’s Control and Heating Components

1. Main Control Board Test

• Slide the range out from the wall and remove the rear cover on the top back of the control panel by unscrewing the Phillips-head screws.
• Plug in and power on the appliance. Caution: Be careful of live voltage to avoid electric shock.
• Locate the CN04 and CN05 connectors on the main control board.
• Set your multimeter to measure DC voltage (VDC).
• Test the orange-to-blue wires on the CN04 connector; you should read 4.7 VDC.
• Test the black-to-white wires on the CN05 connector; you should read 3.85 VDC.
• If the readings are incorrect, the main control board is faulty and may need to be replaced. If correct, continue to the next step.

2. Relay Control Board Test

• Pull the range out further and remove the rear panel to expose the relay control board on the right side above the terminal block.
• Set your multimeter to measure AC voltage (VAC).
• Test from the gray wire to chassis ground; you should read 120 VAC.
• Set the oven to bake and test the yellow wire to chassis ground; you should read 120 VAC.
  • If the bake element isn’t working but voltage is present, the element may be defective.
• Test the black wire to chassis ground for 120 VAC.
• Set the oven to broil and test the brown wire to chassis ground; you should read 120 VAC.
  • If voltage is present but the broil element isn’t working, the element could be faulty.

3. Bake Element Test

• Set the oven to bake and ensure it’s plugged in.
• Set your multimeter to measure VAC.
• Measure from one terminal of the bake element to the other; you should read 240 VAC.
• If you get 240 VAC but the element doesn’t heat, the bake element is faulty and should be replaced.

4. Broil Element Test

• Set the oven to broil and leave it plugged in.
• Set your multimeter to measure VAC.
• Measure from one terminal of the broil element to the other; you should read 240 VAC.
• If you get 240 VAC but the broil element doesn’t heat, the broil element is faulty and should be replaced.

5. Oven Sensor Test

• Unplug the range to avoid electric shock.
• Locate the oven sensor, usually on the right side of the back panel.
• Disconnect the sensor harness.
• Set your multimeter to measure resistance in Ohms.
• Test the sensor; a functional sensor should read around 1080 Ohms at room temperature.
• If the sensor shows a significantly different reading, it’s likely faulty and should be replaced.

Maintenance Tips for Your Samsung Electric Range

Regular maintenance of your Samsung electric range can extend its lifespan and prevent issues with bake and broil functions. Here are some tips to keep your oven in top shape:

1. Clean the Interior Regularly: Grease, spills, and food particles can build up inside the oven, affecting performance and causing uneven heating. Use an oven-safe cleaner or a baking soda paste to clean the interior monthly. Avoid abrasive materials that can scratch the oven’s surface.
2. Inspect the Heating Elements: Periodically check the bake and broil heating elements for signs of wear, such as cracks or discoloration. If you notice any damage, consider replacing the element to prevent further issues.
3. Check the Door Seal: A tight door seal keeps heat inside the oven, ensuring even cooking. Over time, seals can wear out, allowing heat to escape. Check the door gasket for tears or wear and replace it if necessary to maintain a good seal.
4. Calibrate the Oven Temperature: If your oven’s temperature seems inaccurate, calibrating it can help improve cooking results. You can use an oven thermometer to check if the temperature matches the setting and follow the user manual for calibration instructions.
5. Clean the Temperature Sensor: A dirty temperature sensor can give inaccurate readings, causing your oven to overheat or underheat. Clean the sensor with a soft cloth to remove any residue. Be careful not to bend or damage it.
6. Avoid Slamming the Oven Door: Slamming the door can loosen internal connections or damage the control panel. Always close the door gently to prevent wear on parts that could affect bake and broil functions.
7. Run the Self-Cleaning Cycle Sparingly: While self-cleaning is a convenient feature, excessive use can strain the oven’s heating elements and electronics. Use it only as needed, and ensure proper ventilation when running the cycle.
8. Vacuum Dust from the Cooling Vents: Dust can accumulate in the cooling vents, restricting airflow and causing the oven to overheat. Periodically vacuum the vents with a soft brush attachment to keep them clean.
9. Check for Firmware Updates (for Smart Ovens): If your Samsung electric range is a smart model, check for firmware updates regularly. Updated firmware can fix bugs and optimize performance, including temperature regulation and control panel functionality.
10. Test the Control Panel: Make sure all buttons and settings on the control panel respond correctly. Malfunctioning buttons or dials can impact cooking functions and should be addressed promptly.

Read more: How to Fix the F23 Error on Your Frigidaire Electric Range

If your Samsung electric range isn’t baking or broiling as it should, it can be frustrating. But don’t worry! With a bit of patience and the right tools, most issues can be fixed at home. Just follow the troubleshooting steps in this guide, and you’ll be able to test things like the control board, heating elements, and oven sensor to spot any problems. 

Be sure to keep your oven in good shape with regular cleanings, checks, and calibrations to avoid future issues. Take care of it, and your oven will be ready to help you cook delicious meals for years to come!