The warming element in your Samsung electric range helps keep food at a ready-to-serve temperature. Over time, it can wear out or stop working. If the element isn’t heating, doesn’t maintain temperature, or keeps tripping the circuit breaker, it may need to be replaced.
This is a repair you can do yourself with a few tools and some basic care.
Common Signs the Warming Element Needs Replacement
Not sure if the warming element is the issue? Here are some clues that it may be failing:
- The element does not heat up at all, even when selected on the control panel
- The temperature stays too low or becomes inconsistent
- Food doesn’t stay warm, even after waiting several minutes
- The circuit breaker trips when the warming element is in use
- Visible damage to the element, like cracks, blisters, or burn marks
- An error code appears related to heating or element failure
What You’ll Need
- A replacement warming element that fits your specific Samsung model
- Phillips head screwdriver
Safety Precautions
Safety comes first when working on any appliance. Keep the following tips in mind:
- Turn off the power and unplug the range or switch off the circuit breaker. This prevents electrical shock.
- Let the range cool completely before you begin. Hot surfaces can cause burns.
- Work carefully and don’t rush. Taking your time helps avoid accidents.
- Use a well-lit space so you can clearly see what you’re doing.
- Keep your work area clean and clear. Keep children and pets out of the area.
- Make sure your hands and tools are dry before working. Water and electricity are a dangerous mix.
- Read the user manual to find any specific instructions for your model.
- Handle parts gently. Forcing components can cause damage or injury.
- Wear insulated gloves to protect your hands from sharp edges or debris.
- Avoid touching exposed wires. Use non-conductive tools or wear insulating gloves if you need to move any wiring.
- Take photos or write down wire connections before disconnecting anything. This helps you reconnect everything properly.
How to Replace the Warming Element on a Samsung Electric Range
Follow these steps to safely and correctly replace a faulty warming element on your Samsung electric range.
Power and Access
- Unplug the electric range from the power supply.
- Open the oven door.
- Remove the Phillips head screws at the top of the oven opening.
- Carefully flip the main top of the range over to access the warming element underneath.
Disconnect the Old Element
- Take a photo of the wiring connections to the warming element.
- Locate the bracket that holds the warming element in place.
- Remove the two screws that secure the bracket.
- Disconnect the wiring from the warming element.
- Lift the old warming element out of the range.
Install the New Element
- Connect the wires to the terminals on the new warming element, matching the configuration in the photo.
- Place the new warming element onto the bracket.
- Secure the bracket back into the range with the two screws.
Reassembly and Testing
- Flip the main top of the range back over and align it in place.
- Reinstall the Phillips head screws at the top of the oven opening to secure the main top.
- Plug the electric range back into the power supply.
- Test the range to confirm the new warming element is working correctly.
After Replacement: What to Check
Once you’ve installed the new warming element, test the range to confirm everything is working correctly:
- Power on the range and activate the warming zone
- Wait a few minutes to see if the element heats up properly
- Check for any unusual noises, smells, or tripped breakers
- Make sure the element sits evenly and is firmly connected
- Look for any error messages on the display
- Test the element with a small dish to verify it keeps food warm
Also Read: How to replace the warming element on an electric Samsung range
Key Takeaways
Wrapping up, swapping out the warming element in your Samsung electric range is a solid way to bring it back to full function without calling in a pro. The signs of a faulty element are pretty easy to spot once you know what to look for. With a little patience and the right tools, the fix is straightforward. Just take your time, follow the steps, and make safety a priority. Getting your warming zone back in action means your meals can stay hot and ready whenever you are.