Installing an electric fireplace is an excellent way to add cozy ambiance and warmth to any room in your home. While the installation itself is reasonably straightforward, careful planning and attention to detail are required to ensure proper placement, wiring, finish work, and safety.
This comprehensive guide will walk you through the entire electric fireplace installation process in fine detail, with useful tips and best practices included along the way. By the end, you’ll have the confidence and know-how to install your electric fireplace safely, neatly, and professionally.
Initial Planning Steps
Before getting started, there are a few important planning considerations to make first. Proper planning is crucial for a smooth and successful install.
Choose the Fireplace Location
The most critical initial planning step is choosing the right spot for your new electric fireplace. The location should:
- Allow for adequate ventilation space around the unit as specified by the manufacturer
- Be positioned properly with respect to wall studs (typically between two studs)
- Not interfere with room furnishings or traffic flow
- Fit the size and style of the unit that you have selected
Carefully measure the intended fireplace location and also the fireplace unit itself during this process to ensure proper sizing and placement. Consider making a cardboard template symmetrical to the precise fireplace dimensions that you can temporarily tack in place to visualize the fit.
Getting the location right from the start prevents issues down the road. It also minimizes any rework needed related to wall cutting or framing later during installation.
Select a Suitable Installation Method
Electric fireplaces may be installed using one of three common methods, depending on design:
- Recessed/Built-In: Fireplace is recessed into the wall between studs (requires wall cutting, framing, and finishing work)
- Wall Mounted: Fireplace placed directly on the wall surface (requires sturdy wall anchoring only)
- Floor Standing Unit: Self-contained free-standing fireplace, typically placed against a wall
| Method | Pros | Cons |
| Recessed/Built-In | Seamlessly blends into room décor with custom look and finish | More installation work required |
| Wall Mounted | Easy to install | Visually protrudes from wall slightly |
| Floor Standing | Very easy to install, can be freely moved | Takes up floor space in room |
The table above summarizes key differences between installation methods to consider when selecting the right option for your fireplace and room.
Choose a Power Source
Modern electric fireplaces offer flexibility when it comes to power connections:
- Standard electrical outlet
- Direct home wiring (hardwired install)
Using an outlet preserves fireplace portability since no permanent home wiring alterations are needed. However, directly wiring the fireplace makes for a cleaner built-in look without a visible power cord present.
If outlet powered, ensure ample free space exists behind the planned fireplace location to prevent cord crimping when slid fully back into the recessed space.
Either power option will work perfectly well – this choice comes down to personal aesthetic preferences around permanency and intended fireplace mobility.
Gather Necessary Tools & Materials
With initial planning completed, take stock of required tools, equipment, and building supplies needed to complete the installation. Having these items ready beforehand ensures efficient ongoing progress:
Tools Required
- Tape measure
- Level
- Stud finder
- Drill + drill bits
- Saw (jigsaw, circular saw, or oscillating multi-tool depending on cuts)
- Sandpaper/sanding block
- Safety equipment (glasses, ear protection, etc.)
Materials Typically Needed
- Framing lumber (2x4s, 2x2s etc.)
- Wall finish materials (drywall, backerboard, etc.)
- Screws and other hardware
- Caulk, drywall putty, mesh tape
- Primer/paint
- Electrical supplies (outlet, wire, conduit etc. if hardwiring)
Check your specific electric fireplace manual as well for any unique tools or supplies required related to mounting, ventilation, media beds, or trim kits. Better to find out up front rather than mid-project!
Also ensure you have sufficient electrical circuit capacity for the product or plan to install a dedicated circuit. Consult an electrician if needed here.
With planning fully wrapped up, it’s now safe to move on to the actual installation process.
Built-In Fireplace Installation
If you’ve elected to recess mount your new electric fireplace into an existing wall, this section covers the complete installation sequence in chronological order.
Step 1: Turn Off Power and Inspect Wall Location
Safety first! Switch off all home electrical power via the main breaker panel before commencing any installation work. Verify power is off using a non-contact voltage tester.
Next, examine the planned fireplace location carefully to identify potential issues early on:
- Verify accurate centered placement allowing equal margin space on both sides
- Confirm adequate depth for fireplace chassis behind finished wall
- Check for obstructions like pipes, conduits or HVAC ducts
- Ensure installation area allows needed clearance around vent openings
Use a stud finder to locate precise stud positions bordering the installation zone. Having this info avoids surprises later when cutting into the wall.
If challenges exist with the initial location, determine solutions now before progressing further.
Step 2: Prepare and Frame the Fireplace Opening
With the site fully prepped, measurements confirmed, and power off, it’s time to start cutting and building out the rough opening:
- Outline intended opening dimensions using a pencil and straightedge. Account for drywall thickness in your measurements.
- Carefully cut opening using a drywall saw or oscillating multi-tool. Make cleanly aligned vertical and horizontal cuts.
- Remove cutout drywall and insulation without damaging surrounding areas. Vacuum debris.
- Frame out opening with 2×4 stud lumber matching the same depth as wall. Construct securely using finishing nails or wood screws.
- Ensure frame is properly dimensioned, square, and plumb using a tape measure and level before proceeding.
Ideally at least 2” clearance should exist around the firebox outer edges to allow room for finished wall materials and ventilation space. Avoid any framing discrepancies that could cause improper fireplace fit later on.
Step 3: Prepare Wiring and Electrical
With the fresh framing in place, wiring and electrical prep comes next:
For outlet installs:
- Confirm suitable outlet placement following manufacturer guidelines
- Check outlet is de-energized before proceeding with installation
For direct home wiring:
- Plan wiring route through cut opening to junction location
- Fish wire through walls and secure properly without damage
- Leave ample extra wire length for final fireplace connections
If hardwired, now is an excellent time to schedule rough-in electrical inspection by the town building department prior to concealing wire runs.
Step 4: Install Fireplace and Ventilation
The fun part arrives…time to mount the electric fireplace itself!
- Carefully slide fireplace chassis into framed opening. Align mounting brackets with framework.
- Attach firmly into framing using screws. Ensure no gaps exist between wall and fireplace.
- Connect main power following instructions if hardwired. For outlets, connect power cord to energized receptacle.
- Install any required ventilation grilles, baffles, or ducting per manufacturer specifications.
- Verify all clearances meet guidelines to prevent fire hazards.
- Perform initial power-up test by energizing fireplace temporarily. Allow full heat cycle to ensure no issues exist before proceeding with finishing work.
With the electric fireplace itself now permanently installed, the home stretch remains – applying final wall materials and trim details.
Step 5: Install Wall Finish Materials
Framing openings and gaps need covering to give a seamless built-in fireplace appearance:
- Cut finish materials (drywall, cement board etc.) to size and install using adhesive and screws. Work carefully around vent openings.
- Mud and tape drywall seams using fiber mesh tape and drywall compound. Feather and blend.
- Prime and paint wall when dry using paint matched to room décor.
- If desired, add trim molding around fireplace perimeter using construction adhesive for quick grabs and finishing nails.
- Caulk along edges, corners, and gaps for a neat professional appearance.
- Allow paint and caulk to fully cure for 1-2 days prior to use.
The hour is finally at hand…time for the big reveal by powering on your dazzling new fireplace!
Alternative Installations
While built-ins offer stunning fireplace integrations, wall mounts and standalone units provide simpler options depending on room goals and constraints.
Let’s quickly cover best practices for these alternative install styles:
Wall Mount
Wall mounted fireplaces physically attach onto wall surfaces without recessing into framing. Units come with affixed bracket hardware used to securely anchor onto studs or masonry:
- Ensure mounting location has adequate structural integrity to support weight
- Properly size and install supplemental wall reinforcement if existing wall is insufficient
- Attach using conforming hardware designed for the wall construction type
- Follow all manufacturer clearance requirements around vent openings
Completing these key steps results in a safely secured wall mount ready for ignition.
Standalone/Portable
Free-standing fireplaces require minimal setup other than routine placement considerations:
- Position unit the minimum safe distance away from room walls and objects as instructed
- Avoid curtain drapes, furniture, decorations or other combustibles in proximity zone around unit
- Plug power cord into grounded receptacle able to support electrical load
- Arrange furnishings to allow sufficient walkway space for safe access to controls
Portable flexibility allows repositioning standalone units easily whenever desired with no remounting required!
First-Time Operation
Congratulations on reaching the exciting operational phase! Please review these tips before enjoying first-time fireplace use:
- Carefully read all included safety, use, and maintenance literature
- Ensure no object combustibles exist within specified clearance zones
- Confirm room ventilation meets codes for fireplace exhaust size
- Initialize maiden ignition sequence as directed and observe unit carefully, looking/smelling for any indications of trouble
- Let run through entire heat/fan cycle to validate all components function properly
- Power off and allow sufficient cooling prior to handling or touching exterior surfaces
Assuming successful power-up with no issues encountered, operational break-in is now complete! Adjust settings to tailor the perfect visual ambiance and temperature for your enjoyment.
Ongoing Safety Best Practices
While modern electric fireplaces present minimal risks compared to real wood-burning units if properly installed, prudent safety steps continue applying for optimal use after setup:
- Keep appliances away from water exposure risks in bathrooms or laundry rooms
- Secure cords neatly to avoid tripping hazards and keep out of walkways
- Check ventilation intakes routinely to ensure no blockage by foreign objects
- Clean fan and heating elements regularly to prevent buildup of dust, lint or debris
- Confirm no damages exist to cords, wiring, glass fronts or other physical components
- Address any new or unusual sounds, smells or operation irregularities immediately
Adhering to pragmatic safety fundamentals allows benefiting from cozy fireplace rewards for years to come!
Troubleshooting Help
In rare cases, technical problems may arise with electric fireplaces after installation. Review this troubleshooting checklist for the most common symptoms:
Fireplace refuses to power on at all
- Check GFCI outlet or circuit breaker
- Ensure unit switched fully ON
- Test outlet for power using verified working device
- Inspect cord thoroughly for damage
- Contact manufacturer support for unit diagnostic steps
Fireplace cuts out intermittently
- Clean lint/dirt from temperature safety cutoff switch
- Ensure no obstructions blocking front heat outlet vent
- Confirm room ventilation sufficient to dissipate warm exhaust air
- Check all wiring secured properly with no loose connections
Odd noises from fan or heater
- Power off immediately when unusual sounds occur
- Contact manufacturer providing detailed acoustic descriptions
- Request replacement parts, repair or warranty service as needed
Remote control does not work
- Check battery replacement needed
- Re-sync remote with base station receiver per guide
- Ensure no interfering signals from other remotes or wireless devices
- Attempt manual control panel power cycling
While not exhaustive, this checklist covers 95% of common electric fireplace abnormalities! Start troubleshooting here before assuming unit requires service.
Final Thoughts
We hope this all-encompassing walkthrough gives you supreme confidence tackling your own electric fireplace installation successfully. While containing many steps, none are terribly complex with the right prep, safety diligence, tools and patience.
The hassle becomes worthwhile once that first fire lights up upon initial activation. Sip your eggnog while cozying up to the magical flickering flames as your family celebrates the holidays!