Steamer spitting hot water droplets onto your clothes instead of clean steam? Spitting usually means water is reaching the head before it fully turns to steam, and a few habits fix it.
Here is why a steamer spits and how to get dry steam.
This article will teach you:
- Why the steamer spits water
- How angle and heat-up matter
- What to check first
- When a part has failed
Why the Steamer Spits
- Not enough heat-up time before steaming.
- Holding the head at a low angle so water runs out.
- Overfilling the tank.
- Scale disrupting steam flow.
What You’ll Need
- Distilled water
- White vinegar
- Your owner’s manual
Order the part with confidence
- Guaranteed to fit when you search by model number
- Same-day shipping on in-stock parts
- 365-day returns on any part
- Free tech support before and after you buy
How to Stop a Steamer Spitting
- Wait longer. Give it the full heat-up time so all water becomes steam.
- Keep the head up. Hold the steamer more upright with the hose not kinked.
- Do not overfill. Fill only to the marked line.
- Descale. Clear scale that causes sputtering.
Pro Tip: Keep the steamer head and hose pointed upward while you work. Tilting the head down or letting the hose sag lets condensed water run out as spitting instead of steam.
Didn't fix it? Ask a technician on the AppliancePartsPros forum.
Post your model number, the symptom, and what you've already tried. Appliance techs and experienced DIYers answer for free, usually the same day.
Ask the forum →80,000+ solved repair threads · no account needed to readWhen to Look a Little Deeper
Because spitting ties to flow and scale, it helps to check those, and reviewing low steam output, a clogged nozzle, or an overheating steamer can reveal the cause.
When to Call a Pro
If it still spits with full heat-up, an upright head, and after descaling, the internal steam chamber may be faulty, which usually means replacing the unit.
Related guides
Wrapping Up
Spitting is usually heat-up or angle. Here’s the recap:
- Allow full heat-up time.
- Keep the head and hose up.
- Do not overfill.
- Descale the steamer.
Wait for full heat and keep the head up, and the spitting stops. You’ve got this.
Still stuck after this guide?
Two free options: post your model number and symptom on the forum, or search the model number in the shop to see every part that fits.
