When your Samsung washer displays the error code 1E (LE), it indicates a problem with the water level sensor. This error can disrupt your laundry routine by preventing the washer from detecting the correct water level. Understanding the causes and solutions for this error can help you quickly get your washer back to normal operation. Let’s explore what the 1E (LE) error means and how you can troubleshoot it effectively.
What Does Error Code 1E (LE) Mean?
Error code 1E (LE) on a Samsung washer means there’s a problem with the water level during the washing cycle. This happens when the machine can’t fill up with enough water or doesn’t reach the right water level in a certain amount of time.
What could be causing this issue? There are a couple of possible reasons:
- The temperature readings might be off-balance
- Using too much detergent with soft water can create extra suds
When your Samsung washer has this error, you might notice some of these things happening:
- The washer takes a long time to fill with water, or it doesn’t fill up at all
- The water level in the washer seems low or keeps changing during the cycle
- You see the error code 1E or LE on the washer’s display
- The washing machine stops in the middle of a cycle and doesn’t finish washing your clothes
- You might hear strange noises, like banging or clicking, while the washer is running
- The washer door stays locked, so you can’t open it after the cycle gets interrupted
- You might see water leaks around the washer or by the drain hose
Check for the 1E or LE error code if you notice any of these signs. This will help you determine what’s wrong and how to fix it.
Troubleshooting Error Code 1E (LE) On A Samsung Washer
If you’re dealing with the frustrating 1E (LE) error code on your Samsung washing machine, don’t worry – we’ve got you covered! This section will walk you through the steps to identify and resolve the issue.
Resetting the Washer
The first thing to try is a simple reset. This can often clear the error code and get your washer back up and running. Here’s how:
- Turn off the power supply to the washing machine by unplugging it from the wall.
- Wait for at least 30 seconds before plugging it back in.
- Turn on the power supply to the washing machine.
- Press and hold the “Delay End” and “Start/Pause” buttons simultaneously for three seconds.
- Release both buttons after three seconds.
This reset should clear the error code and allow you to start a new wash cycle. If the problem persists, let’s dig a little deeper.
Inspecting the Water Inlet Valve
The water inlet valve allows water to flow into the washing machine during a wash cycle. If this valve is faulty, it could be the culprit behind the 1E (LE) error. Here’s how to check it:
- Turn off the power and water supply to the washer before beginning any inspection.
- Locate the water inlet valve at the back of the washer and remove its connections.
- Inspect the valve for signs of damage or wear, such as cracks or corrosion.
- Check that no debris blocks or clogs the valve’s screens or filters.
- Test the valve using a multimeter to check if it works correctly.
- If necessary, replace a faulty water inlet valve with a new one that is compatible with your Samsung washer.
Ensure the water inlet valve is in proper working order to rule out this as the source of the error code.
Checking the Water Level Sensor
The water level sensor is another critical component that could be causing the 1E (LE) error. Let’s take a closer look:
- Disconnect the washer from its power source and turn off the water supply valves.
- Remove the top panel of the washer by unscrewing any bolts or screws holding it in place.
- Locate the water level sensor, usually near the rear of the washer drum or under the control panel.
- Inspect the water level sensor wiring for any signs of damage like frayed wires or loose connections.
- Clean debris or buildup around the water level sensor with a soft brush or cloth.
- Test the water level sensor using a multimeter to determine if it’s functioning properly.
If the water level sensor is not working correctly, it may need to be replaced to resolve the error code.
Examining the Drain Pump
The drain pump removes water from the washing machine during a cycle. If there’s an issue with the drain pump, it could lead to the 1E (LE) error. Let’s take a closer look:
- Unplug the washing machine and ensure it is not connected to any power source before you begin.
- Locate the drain pump at the bottom of your washer.
- Check for any visible signs of blockage, such as small objects or debris caught inside the pump’s impeller blades.
- Inspect the drain pump’s wiring to other components in your washer for fraying or damage.
- Test the continuity of your drain pump using a multimeter to ensure it works correctly.
- If you notice any signs of wear or tear, it may be necessary to replace your drain pump.
By ensuring the drain pump is functioning properly, you can rule out another potential source of the 1E (LE) error.
Inspecting and Cleaning Filters
Clogged or dirty filters can also contribute to the 1E (LE) error. Let’s check them out:
- Locate the filter(s) associated with your Samsung washer.
- Remove the filter(s) from their housing.
- Inspect them for debris or blockages, such as lint or dirt buildup.
- If there are visible obstructions, rinse the filter(s) under running water until they are clean.
- Use a soft-bristled brush to scrub any stubborn debris away gently.
- Once cleaned, reinsert the filter(s) back into their housing and ensure that they are secured properly.
Keeping your washer’s filters clean and debris-free can help prevent the 1E (LE) error from occurring in the future.
Examining the Pressure Sensor
The pressure sensor monitors the water level in your washing machine. If this component malfunctions, it could trigger the 1E (LE) error. Let’s take a closer look:
- Turn off the power supply and unplug the machine.
- Locate the pressure sensor, usually found at the bottom of the drum.
- Remove any obstacles or debris around the sensor.
- Check for any signs of damage, such as cracks or chips in the sensor surface.
- Inspect the wiring connections going into and out of the pressure sensor to ensure they are secure and not loose or corroded.
- Use a multimeter to test for continuity between each of the three wires coming out of the sensor. If there is no continuity, this indicates a faulty pressure switch.
If the pressure sensor is not working correctly, it may need to be replaced to resolve the 1E (LE) error.
Preventing Future Occurrences of the 1E (LE) Error Code
Proper care and upkeep of your Samsung washer can help you avoid the 1E (LE) error code. Here are some maintenance tasks you should regularly perform:
- Clean the detergent drawer: Remove the detergent drawer and clean it regularly with warm water and a mild soap solution. This helps prevent the buildup of detergent residue, which can cause issues with water flow.
- Wipe down the interior drum: After every wash cycle, wipe down the interior drum with a clean, damp cloth. This helps remove any leftover dirt, lint, or debris that could accumulate over time.
- Check for leaks: Regularly check for leaks near the water supply lines and hoses. Leaks can lead to water level issues and trigger the 1E (LE) error.
- Clean filters: Inspect and clean both the inlet and outlet filters at least once a month or as often as necessary. Clogged filters can restrict water flow and cause the error code to appear.
- Avoid overloading: Don’t overload the washer beyond its capacity. Overloading can strain the machine’s components and lead to breakdowns, including the 1E (LE) error.
By staying on top of these maintenance tasks, you can help prevent the 1E (LE) error code from popping up in the future. It’s a small investment of time that can save you a lot of frustration.
Also read Troubleshoot and Repair a Samsung Washer Displaying the nF Error Code
Conclusion
We’ve covered a lot of ground, from what the error code means to the various steps you can take to get your washer back up and running.
Regular maintenance and cleaning are the keys to avoiding future 1E (LE) errors. Taking the time to care for your washing machine can help prevent many headaches down the road. After all, who wants to deal with a broken-down washer when you have laundry?
So, let’s recap the main points:
- Error code 1E (LE) is caused by an issue with the water level in your washing machine, often due to a problem with the water inlet valve, water level sensor, or other components.
- Troubleshooting steps include resetting the washer, inspecting the water inlet valve, checking the water level sensor, examining the drain pump, cleaning the filters, and testing the pressure sensor.
- Regular maintenance, such as cleaning the detergent drawer, wiping down the drum, and checking for leaks, can go a long way in preventing the 1E (LE) error code from occurring in the first place.
Remember, if you ever feel unsure or uncomfortable about tackling any of these repairs, don’t hesitate to call in a professional. Your safety and the longevity of your washing machine are the top priorities.
Well, there you have it – everything you need to know about your Samsung washer’s 1E (LE) error code. With this information in your back pocket, you can take on any washing machine woes that come your way. Happy washing!