Does your Samsung washer flash a cryptic TE error code? Don’t worry, this common issue has a simple fix. The TE code means there’s a problem with the washing machine’s temperature sensor. By following a few easy troubleshooting steps, you can get your washer out of ‘error mode’ and back to washing clothes in no time. This article will walk you through resetting the control board, checking the sensor wiring, inspecting the thermistor itself, and verifying the washer’s temperature settings. With some basic DIY repairs, you can save the hassle and expense of calling for service. Read on to learn how to diagnose and resolve the TE error on your Samsung washer.
What Causes the TE Error Code on My Samsung Washer?
The TE error code on Samsung washers means there is a problem sensing the right water temperature. Let’s look at what can cause this.
There are two main reasons you might see the TE code:
1. The temperature sensor is worn out or damaged
- This sensor monitors the heat of the water during wash and dry cycles.
- Over time, this part can break from normal wear and tear.
Has your machine been used heavily for many years? That could be why the sensor went bad. Sudden damage is also possible if the washer took a hard hit.
2. There is an issue with the control board
- This is the computer “brain” controlling everything.
- If it can’t get correct readings from the temp sensor, you’ll get a TE error.
Problems with the control board could happen slowly over time. Or if there was a power surge, that might have damaged it.
Why the Water Temperature Sensor Matters
The temperature sensor has three important jobs:
1. Monitors Heat Levels of the Water
- Check how hot or cold the water is during wash and dry cycles.
- Sends this data to the control board.
Without this sensor, the washer wouldn’t know if the water was the perfect warm temperature to dissolve detergent and loosen dirt.
Have you ever put your hands in water and couldn’t tell if it was too hot or cold? The machine needs the sensor to “feel” the right heat.
2. Ensures the Best Cleaning Results
- Helps provide the ideal water temp for cleaning.
- Hotter water can damage clothes or waste energy if too high.
The sensor makes sure your laundry gets clean without overheating the machine. No one wants hot water wasting electricity or ruining their clothes!
3. Saves Energy
- Prevents overheating beyond what’s needed.
- This saves electricity and lowers energy bills.
By keeping tabs on the precise temperature, the washer won’t use more heat than necessary. This sensor helps your wallet and the environment!
Troubleshooting the TE Code Error on Your Samsung Washer
Seeing a TE error code pop up on your Samsung washer? Don’t worry, this error is usually pretty easy to fix on your own. The TE code means there is likely an issue with the washer’s temperature sensor. Let’s walk through the steps to troubleshoot this error and get your washer washed again!
Reset the Control Board
The first thing to try is resetting the washer’s control board. This can clear up any temporary glitches causing the TE error.
- Unplug the washing machine from the power outlet.
- Wait 10 to 15 minutes before plugging it back in. This gives the control board a chance to reset.
- Plug the washer back in and turn it on.
- Check if the TE error code still shows. If not, you fixed it!
Check the Thermistor Wiring
If resetting the control board didn’t work, the next step is checking the thermistor wiring. The thermistor is the temperature sensor.
- Unplug the washer again.
- Take off the back access panel.
- Find the thermistor near the heating element.
- Check that all wires are plugged in snugly.
- Replace any wires that are loose or broken.
- Use a multimeter to test that the thermistor is working correctly.
Inspect and Replace the Thermistor
If the wiring checks out, the thermistor itself might need replacing.
- Unplug the washer and locate the thermistor.
- Disconnect it from the control board.
- Check for any damage.
- Test it with a multimeter.
- If readings are off, replace the thermistor.
- Reconnect everything securely.
- Run a test cycle to check for the TE error.
Verify Water Temperature Settings
Finally, double-check that the washer’s temperature settings are correct.
- Check the Auto Temperature feature.
- Run diagnostic mode to test temperatures.
- Manually measure the water temp.
- Make sure hot water connections are secure.
- Confirm the outlet is supplying adequate power.
With some simple troubleshooting steps, you can likely fix the TE error on your Samsung washer. First, try resetting the control board. Then inspect the thermistor wiring and sensor itself. Finally, verify the washer’s temperature settings. With a bit of DIY repair, your washer will be washing away in no time!
Wrapping Up
Dealing with appliance error codes can be so frustrating! But with the right info, you can often fix the problem yourself and save time and money on repairs.
In this article, we went through how to troubleshoot a TE error code on your Samsung washer. This error means there’s likely an issue with the temperature sensor.
First, we talked about resetting the control board. Just unplugging and replugging in the washer can clear up a temporary glitch causing the TE code.
Next, we covered checking the wiring and connections for the temperature sensor, called the thermistor. Damaged wires or loose plugs can cause the TE error.
We also discussed inspecting and replacing the thermistor if needed. Using a multimeter to test it will tell you if the sensor itself is broken.
Finally, we went through verifying the washer’s temperature settings. Things like the Auto Temp feature, diagnostic tests, and hot water connections can impact the TE code too.
Troubleshooting appliance issues seems hard, but really just takes some simple steps. Now you’re armed with the knowledge to tackle a TE error code on your Samsung washer! With a bit of DIY repair, you can avoid the hassle and cost of a service call.
We hope this guide gave you the confidence to try fixing your washer yourself. Remember to always unplug the appliance and use caution when attempting repairs. With the right info and safety, you’ve got this!